🏭 Solar & electronics ERP: SMT production

Every board, every reel, every second of the line, accounted for

Live OEE for each SMT line, feeders checked by scan before a single board runs, reflow profiles held in their window, and every AOI defect traced to its cause.

Line 2, current shiftRunning
0%OEE
0
0
0

Reflow profile

Keep every run inside the solder window

An example lead-free profile with shaded limits for peak temperature and time above liquidus. Move the peak and the time.

0
0

Feeder verification

Scan before you run

Changeover for an inverter control board. Tap Scan to check each reel against its slot. Demo data.

8 feeders loaded. Line locked until every reel is verified.

AOI defects

Fix the biggest cause first

Last week's AOI defects by type on 12,000 boards with 640 placements each. Hover or tap a bar. Demo data.

How it works

From whiteboards to a live line

Six steps to go live.

  1. Step 1Map linesMachines, stations and feeders.
  2. Step 2Load programsProducts, BOMs and setups.
  3. Step 3Connect machinesPlacement, SPI, AOI and oven.
  4. Step 4Set limitsProfiles, MSD and quality.
  5. Step 5Train operatorsScanning at changeover.
  6. Step 6Go liveLine by line.
What it changes

Results the line and quality notice

What changes once every board is tracked through every station.

Higher OEE

Losses seen by cause, shift by shift.

No wrong reels

Every feeder checked before the run.

Stable soldering

Profiles that stay in their window.

Full traceability

Any board traced to its reels.

Who it's for

Built for electronics assemblers

From one SMT line to a multi-plant EMS.

  • EMS and contract manufacturers
  • Solar inverter makers
  • LED driver and lighting makers
  • Automotive electronics suppliers
  • Telecom and IoT device makers
  • Battery BMS and charger makers
Solar & electronics ERP

Other modules in the suite

One integrated system.

FAQ

SMT production questions

Answers for production, process and quality engineers.

What is SMT production software?

Software that runs surface mount lines: schedules and setups, feeder verification, moisture-sensitive part control, reflow checks, inspection results, OEE and board traceability.

How is OEE calculated?

Availability times performance times quality. A line that runs 90% of planned time, at 85% of ideal speed, with 98% good boards, has an OEE of about 75%.

What is feeder verification?

At changeover, operators scan each reel and feeder slot. The system checks it against the program and stops the line if a wrong part is loaded.

Why track moisture sensitive devices?

Some packages absorb moisture once out of the dry pack and can crack in reflow. Floor life timers and bake records prevent this.

What is a reflow profile?

The temperature over time a board sees in the oven: preheat, soak, reflow peak and cooling. Each solder paste has a window; the system flags runs outside it.

What is DPMO?

Defects per million opportunities: defects divided by boards times opportunities per board, times one million. It lets boards of different complexity be compared.

Which machines can it connect to?

Placement machines, printers, SPI, AOI and ovens that export data by file or interface. We map each one during setup.

Can it trace a board to its reels?

Yes. Each board serial links to the reels, lots, machines and operators used to build it.

How long does implementation take?

As an estimate, 6 to 10 weeks per line, depending on how machines connect.

Get In Touch

Ready to see your line's OEE in real time?

Tell us your lines, machines and current MES tools. We reply within 4 business hours.

⏰
Response TimeWithin 4 business hours (your timezone)
Trusted by clients worldwideIndia · Australia · Fiji · Globally
15+Years of expertise
500+Projects delivered
3Countries served
✓ Free consultation✓ Reply in 4 business hours✓ NDA on request
Send Us a Message