🔥 Foundry ERP: Heat & melt management

Charge it right, melt it once, tap it on chemistry

Charge mixes planned from pig iron, scrap and returns, spectro results checked against the grade, alloy corrections worked out to the kilo, kWh per tonne for every heat, and each casting traced back to the heat it came from.

1 tonne charge · Grey iron FG 260Charge mix
Energy per tonne

Every minute of holding costs power

An induction furnace melting a 2-tonne heat. Move the holding time at tap temperature to see kWh per tonne. Illustrative model.

0

Spectro check

Off on silicon? Here's what to add

A first spectro sample from heat H-2612 against the FG 260 range. Press Correct to apply the suggested additions. Demo data.

Heat board

Today's heats, furnace by furnace

Each heat with its grade, weight and energy use. Hover a heat. Demo data.

How it works

From heat registers to live melt data

Six steps to go live.

  1. Step 1Load gradesChemistry limits.
  2. Step 2Load charge materialsAnalysis and cost.
  3. Step 3Connect spectroResults by heat.
  4. Step 4Connect energy meterskWh per furnace.
  5. Step 5Set alloy rulesRecoveries and limits.
  6. Step 6Go liveNext heat.
What it changes

Results foundry heads and customers notice

What changes once every charge, heat and kWh is recorded.

First-time-right heats

Fewer corrections.

Lower kWh per tonne

Holding time cut.

Cheaper charge

Least-cost mix.

Full traceability

Heat to casting.

Who it's for

Built for every kind of foundry

From one induction furnace to multi-plant melt shops.

  • Grey and SG iron foundries
  • Steel foundries
  • Automotive casting suppliers
  • Valve and pump casting makers
  • Aluminium and non-ferrous foundries
  • Investment casting units
Foundry ERP

Other modules in the suite

One integrated system.

FAQ

Heat and melt questions

Answers for foundry owners, melt shop heads and metallurgists.

What is heat and melt management software?

Software for the melt shop that plans charge mixes, records each heat with spectro chemistry, alloy additions, temperatures and energy, and links every heat to the castings poured from it.

How is the charge mix worked out?

From the analysis and cost of pig iron, steel scrap, returns and alloys, the system finds a mix that hits the grade's chemistry at the lowest cost.

Can it read the spectrometer directly?

Yes, for spectrometers that export results. Otherwise results are entered with checks against limits.

How are corrections suggested?

If carbon, silicon or manganese is outside the range, the system works out the carburiser or ferro-alloy to add, allowing for recovery.

Does it track energy?

Yes. kWh from furnace meters is recorded per heat, giving kWh per tonne by furnace, grade and shift.

Does it work for SG iron?

Yes. Magnesium treatment, inoculation and residual Mg checks are recorded with the heat.

Can castings be traced to heats?

Yes. Each casting batch carries its heat number, linking to chemistry and test certificates.

Does it handle returns?

Yes. Runners, risers and rejects come back as returns with their grade, ready for the next charge.

How long does implementation take?

As an estimate, 4 to 8 weeks, depending on furnaces, grades and instrument links.

Get In Touch

Ready to hit chemistry on the first tap?

Tell us your furnaces, grades and monthly tonnage. We reply within 4 business hours.

⏰
Response TimeWithin 4 business hours (your timezone)
Trusted by clients worldwideIndia · Australia · Fiji · Globally
15+Years of expertise
500+Projects delivered
3Countries served
✓ Free consultation✓ Reply in 4 business hours✓ NDA on request
Send Us a Message