🗑️ Printing & packaging ERP: Wastage control

Every wasted sheet counted, every cause found

Sheets issued reconciled against good cartons packed, waste split by process, press and shift, make-ready measured against standard, and scrap weighed, sold or disposed of with the records the law asks for.

What waste costs youEstimate
0
0
0
0
Board wasted a month₹0
Saving at target, a year₹0
Where sheets go

10,000 sheets in, how many cartons out

One carton job followed through each process. Each band shows sheets lost at that step. Hover or tap a step. Demo data.

Make-ready waste

Same press, different shifts, different waste

Average make-ready sheets per job last month against a standard of 250. Hover or tap a bar. Demo data.

Scrap and disposal

Every kilo leaves with a record

Last month's scrap by stream, and where it went. Demo data.

Hazardous waste goes only to authorised handlers, with manifests stored against each pickup.

How it works

From guesses to measured waste

Six steps to go live.

  1. Step 1Set standardsWaste allowance per process.
  2. Step 2Set reasonsA short list operators use.
  3. Step 3Weigh scrapBy category, each day.
  4. Step 4Tablets at machinesRejects logged as they happen.
  5. Step 5Link to jobsIssued sheets and packed units.
  6. Step 6Go liveDaily waste report.
What it changes

Results the floor and finance notice

What changes once every sheet lost is counted and explained.

Lower board cost

Every point of waste saved is margin.

Causes, not guesses

Waste tied to process, press and shift.

More from scrap

Weighed, graded and sold properly.

Clean compliance

Hazardous and EPR records ready.

Who it's for

Built for printers and converters

From a commercial print shop to a multi-plant packaging group.

  • Folding carton plants
  • Label printers
  • Commercial printers
  • Corrugated box makers
  • Flexible packaging converters
  • Pharma packaging printers
Printing & packaging ERP

Other modules in the suite

One integrated system.

FAQ

Wastage control questions

Answers for owners, production heads and cost teams.

What is wastage control in printing?

Measuring every sheet and kilo lost between material issue and finished goods, by process and cause, then cutting the biggest losses.

How is waste percentage calculated?

Sheets issued minus good sheets equivalent, divided by sheets issued. For cartons, good cartons are converted back to sheets using ups.

What is make-ready waste?

Sheets used to set up a job before saleable sheets come off the press: registering, colour matching and settings.

What is a normal waste level?

It varies widely with job length, process and substrate. The useful number is your own trend by process against your standards.

How do operators record rejects?

On a tablet at the machine: count and reason, in a few taps. Counters can feed quantities automatically where machines allow.

Is ink sludge hazardous waste?

Typically yes. Waste ink, solvents and contaminated rags are handled as hazardous waste under the rules, through authorised handlers.

Does it handle EPR for plastic packaging?

Yes. Plastic and laminate quantities are recorded by category for EPR returns.

Can scrap be sold through the system?

Yes. Scrap is weighed by category and invoiced to buyers, with GST.

How long does implementation take?

As an estimate, 3 to 5 weeks, depending on processes, reasons and machine counters.

Get In Touch

Ready to turn waste back into margin?

Tell us your monthly board use and current waste figures. We reply within 4 business hours.

⏰
Response TimeWithin 4 business hours (your timezone)
Trusted by clients worldwideIndia · Australia · Fiji · Globally
15+Years of expertise
500+Projects delivered
3Countries served
✓ Free consultation✓ Reply in 4 business hours✓ NDA on request
Send Us a Message